Current version by: [deleted]

Title:

How to remove a Stripped Screw from pcb.

Text:

Hi, i have 2.5'' hdd with a torx (T6) screw on the pcb that from the force it's  turned into a round hole.

I have used the  rubber band method but still no luck.Also i cannot use a heat gun cause the microchips may get loose.

I must try at all cost not to  damage the pcb.

Here is some images.

[image|1135719]

[image|1135716]

[image|1135718]

Device:

Hard Drive

Status:

open

Accepted Answer:

Edit by: [deleted]

Title:

How to remove a Stripped Screw from pcb.

Text:

Hi, i have 2.5'' hdd with a torx (T6) screw on the pcb that from the force it's  turned into a round hole.

I have used the  rubber band method but still no luck.Also i cannot use a heat gun cause the microchips may get loose.

I must try at all cost not to  damage the pcb.

Here is some images.

[image|1135719]

[image|1135716]

[image|1135718]

Device:

Status:

open

Original post by: [deleted]

Title:

How to remove a Stripped Screw from pcb.

Text:

Hi, i have 2.5'' hdd with a torx (T6) screw on the pcb that from the force it's  turned into a round hole.

I have used the  rubber band method but still no luck.Also i cannot use a heat gun cause the microchips may get loose.

I must try at all cost not to  damage the pcb.

Here is some images.

[image|1135719]

[image|1135716]

[image|1135718]

Device:

HDD

Status:

open