Matthew Holland, if it is strictly a cleaning the logic board issue, I use isopropyl alcohol with a greater than 70% alcohol concentration, your local pharmacist can get it for you, and scrub the board with a small brush (tooth brushes work well) This will remove most of the corrosion. I do know that some people pre-treat their boards by cleaning it with distilled water and then use the alcohol which will displace the water. Either way make sure that you let the board dry very well after and stay away from any contact cleaner, etc. Hope this helps, I am sure there are 100's more suggestion and ways to do it, but these are my 2cents :-)