Original post by: oldturkey03

Text:

@jaffa2018 the spanner icon is the service light. According to the manual try this:

The service light (spanner icon) is flashing.

1. Turn your machine off at the wall.

2. Wait 1 minute and turn it back on.

3. Check your machine is level (refer to installation instructions pages 2 – 4).

4. Remove load and retry.

5. Put through a RINSE and SPIN cycle.

6. If the fault re-occurs repeat steps 1 and 2.

Let us know what happens when you do so.

Status:

open