BLU Grand M2 Rear Camera Replacement

Introduction

This guide will help you replace the rear-facing camera on the back panel of the BLU Grand M2. It is a five-step process and can be completed in as little as six minutes.

The process is of a moderate difficulty and requires five tools for completion.

What you need

Step 1 Confirm the Device

BLU Grand M2 Rear Camera Replacement, Confirm the Device: step 1, image 1 of 2

BLU Grand M2 Rear Camera Replacement, Confirm the Device: step 1, image 2 of 2

Check the front panel and confirm you are repairing the BLU Grand M2 (figure 1)
Turn the device over and identify the the rear-facing camera (figure 2) This is what you will be replacing

Edit

Step 2

Locate the two torx screws at the bottom of the phone and remove them using the T2 Torx Screwdriver.

Edit

Step 3

Use the suction and pry tools to carefully remove the black plate.
Be cautious!! Do not damage the phone display or inside components while using pry and suction tools.

Edit

Step 4

Identify the back-panel camera in the left -hand corner of the open device. (Figure 1)

Edit

Step 5

BLU Grand M2 Rear Camera Replacement: step 5, image 3 of 3

Tool used on this step:

Tweezers

$4.99

Buy

Use the Plastic Pry Tool to carefully to lift the tab on the right-hand side of the connector.
Carefully remove camera from housing using a pair of tweezers.