Introduction
Use this guide to replace the right bumper in your Backbone One.
What you need
-
-
Lift up the upper cover of the controller.
-
Swing the upper cover over and place it on the controller case.
-
-
-
Use the tip of an opening pick to open the gray flap of the interconnect cable ZIF connector by pushing it upwards.
-
-
-
-
Disconnect the cable by pulling it straight out the ZIF connector.
-
-
-
Use a pair of tweezers to disconnect the phone connector cables out from their sockets.
-
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.
To reassemble your device, follow these instructions in reverse order.
Repair didn’t go as planned? Ask our Answers community for help.