Introduction
This guide shows how to replace the battery leads of the Canon Selphy CP1200. This replacement may be done to replace faulty leads, which may be necessary should the device become unable to run off battery power.
What you need
-
-
-
Open the side door and depress the ink cassette release.
-
Slide out and remove the ink cassette.
-
-
-
Lift out the back case plate.
-
Remove the battery leads by lifting it out of its niche in the case.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.