Introduction
This guide will show how to replace the barrel heating element of your Conair Infiniti PRO Curling Iron. It requires the housing, power cord and motherboard to be removed beforehand.
What you need
-
-
-
Heat up your soldering gun and desolder the red wire from the motherboard as shown.
-
-
Tool used on this step:Desoldering Pump$3.99
-
With your soldering gun, desolder the white wire from the motherboard as shown.
-
-
-
Remove the heating element mount. This will free up the heating element barrel for replacement.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.