Dell Latitude 5480 RAM Replacement

Introduction

For this replacement guide we will be showing you how to replace the RAM processor in your Dell latitude 5480. Users replace their RAM processors if they are wanting more memory due to the laptop operating too slow. To replace the RAM the user first have to disassemble the bottom cover and the battery of their laptop, which they can refer to these prerequisite guides for: Dell Latitude 5480 Bottom Cover Replacement - iFixit Repair Guide

Dell Latitude 5480 Battery Replacement - iFixit Repair Guide. Once steps are completed for the prerequisite guides the user will be ready to follow the steps outlined in this guide.

What you need

Step 1 Lower Case

Dell Latitude 5480 RAM Replacement, Lower Case: step 1, image 1 of 1

Use a Phillips screwdriver to remove the eight 5.6 mm screws that secure the lower case.

Edit

Step 2

Dell Latitude 5480 RAM Replacement: step 2, image 3 of 3

Insert an opening tool into the seam between the lower case and chassis.
Pry up around the perimeter of the device until the lower case fully releases.
Lift off the lower case.

Edit

Step 3 Dell Latitude 5480 Battery Disconnection

Dell Latitude 5480 RAM Replacement, Dell Latitude 5480 Battery Disconnection: step 3, image 1 of 2

Dell Latitude 5480 RAM Replacement, Dell Latitude 5480 Battery Disconnection: step 3, image 2 of 2

Grip the black battery cable connector loop and pull it directly up to disconnect the battery.

Edit

Step 4 RAM

Dell Latitude 5480 RAM Replacement, RAM: step 4, image 1 of 2

Dell Latitude 5480 RAM Replacement, RAM: step 4, image 2 of 2

Two black clips secure each RAM module in place, one on each side. Use your fingers to spread the clips away from the RAM module.
Repeat the previous bullet on the second module.
When released, the RAM modules will pop up at a slight angle.