Dell Latitude E4200 SSD Replacement

John Shellenberger and 2 other contributors

Last updated on June 22, 2015

8.6K

View statistics:

Past 24 Hours:

5

Past 7 Days:

24

Past 30 Days:

34

All Time:

8,617

1

1 comment has been left on this guide! Click to read.

Go to comments

6

6 people have marked this guide "completed." Will you be next?

Mark complete

0

No one has favorited (and subscribed to) this guide. Will you be the first?

Add favorite

5 minutes

Rough estimate of how long this takes. (Use this to plan your day, not to feel judged.)

Easy

Difficulty rating: Easy! Minimal disassembly, using only basic tools.

Introduction

Go to step 1

Follow these steps in order to successfully replace the SSD of your laptop.

What you need

Tools

• 
  Phillips #0 Screwdriver

  $5.49 iFixit$8.99 Moody - Made in USA

  5

  Add to cart

Step 1 Back Panel

• Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.
Step 2




• Place thumbs flat on the front side of the back panel (the side to open the laptop).
• Push panel upwards sliding it out of the locked position.
• Lift panel out of socket.
Step 3
• Remove panel and screw from the device. This opens up the main board of the device.
Step 4 SSD
• Unscrew the two 4.10x4.05 mm screws holding the SSD in place.
Step 5
• Using your finger and thumb lift the hard drive out of the computer but do not disconnect the attached connector to the computer.
Step 6
• By applying pressure to the sides of the connector, pull the connector apart from the SSD.

Author

with 2 other contributors

John Shellenberger

Member since: 03/23/15

490 Reputation

3 Guides authored

Badges: 10

• 
• 
• 

+7 more badges

Team

Baylor, Team 5-6, Williams Spring 2015 Member of Baylor, Team 5-6, Williams Spring 2015

BU-WILLIAMS-S15S5G6

4 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview