Dell Studio 1536 Base Cover Replacement
3 - 6 minutes
Moderate
Community-Contributed Guide
What you need
-
-
Slide the battery release latch until it clicks into place.
-
Slide the battery out of the battery bay.
-
-
-
Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
