Dell Studio XPS 1645 Memory Module Replacement
What you need
-
-
Slide the battery release latch to the side. {2}
-
Slide the battery out of the battery bay. {1}
-
-
-
Loosen the ten captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the module from the connector.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
