What you need
-
-
With an opening pick we will leverage the edge between the interior part in which the earphones are placed and the exterior case. We will surround entire inner part with the opening pick until it comes out.
-
-
-
-
We will unscrew the 3 screws that join the board to the part where we place the earphones (with a Phillips 00 screwdriver).
-
-
-
The Mi Airdots case will be disassembled.
-
To assemble it, the screws are replaced as they are in step 2. We look to place the cables that connect the plate to the battery so that we do not crush them when we assemble the box.
-
To reassemble your device, follow these steps in reverse order.
To reassemble your device, follow these steps in reverse order.
Cancel: I did not complete this guide.
11 other people completed this guide.
Special thanks to these translators:
100%
These translators are helping us fix the world! Want to contribute?
Start translating ›
