Introduction
Outline what you are going to teach someone how to do.
What you need
-
-
Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.
-
-
-
Remove the two screws from underneath the flash mechanism.
-
Remove the two screws placed on the right and left sides of the camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.