Skip to main content

HP 14-fq1025nr SSD Replacement

What you need

  1. HP 14-fq1025nr SSD Replacement, Back Cover: step 1, image 1 of 1
    • Flip the laptop upside down so the bottom cover is facing up.

  2. HP 14-fq1025nr SSD Replacement: step 2, image 1 of 1
    Tool used on this step:
    Tweezers
    $4.99
    Buy
    • Use a pair of tweezers to grab and pull the feet off of the cover.

  3. HP 14-fq1025nr SSD Replacement: step 3, image 1 of 1
    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

  4. HP 14-fq1025nr SSD Replacement: step 4, image 1 of 1
    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

  5. HP 14-fq1025nr SSD Replacement: step 5, image 1 of 1
    • Remove the bottom cover.

  6. HP 14-fq1025nr SSD Replacement, Battery: step 6, image 1 of 2 HP 14-fq1025nr SSD Replacement, Battery: step 6, image 2 of 2
    • Remove the four gray 3 mm screws holding down the battery using a Phillips #0 screwdriver.

  7. HP 14-fq1025nr SSD Replacement: step 7, image 1 of 1
    • Remove the battery.

  8. HP 14-fq1025nr SSD Replacement, SSD: step 8, image 1 of 1
    • Remove the single 6 mm screw holding down the SSD using a Phillips #0 screwdriver.

  9. HP 14-fq1025nr SSD Replacement: step 9, image 1 of 1
    • Slide the SSD out of the slot.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Member since: 11/12/14

85,257 Reputation

215 Guides authored

Team

iFixit Member of iFixit

Staff

140 Members

18,095 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 13

All Time: 429