Fix Your Stuff Community Store

HP 14-fq1025nr Screen Replacement

Introduction

In this guide, you will learn how to remove a HP 14-fq1025nr screen and replace it with a new one. The screen is used to display/output visual information such as a desktop, a document, or an application so that it can be seen by the user(s). A faulty screen may result in a large area of dead pixels (a pixel is a minute area of illumination on a screen) or a completely dead screen. For additional information and help with troubleshooting the screen, refer to our troubleshooting page.

What you need

  1. HP 14-fq1025nr Screen Replacement, Back Cover: step 1, image 1 of 1

    • Flip the laptop upside down so the bottom cover is facing up.

    Edit

  2. HP 14-fq1025nr Screen Replacement: step 2, image 1 of 1
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use a pair of tweezers to grab and pull the feet off of the cover.

    Edit

  3. HP 14-fq1025nr Screen Replacement: step 3, image 1 of 1

    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

    Edit

  5. HP 14-fq1025nr Screen Replacement: step 4, image 1 of 1

    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

    Edit

  6. HP 14-fq1025nr Screen Replacement: step 5, image 1 of 1

    • Remove the bottom cover.

    Edit

  7. HP 14-fq1025nr Screen Replacement, Screen: step 6, image 1 of 3 HP 14-fq1025nr Screen Replacement, Screen: step 6, image 2 of 3 HP 14-fq1025nr Screen Replacement, Screen: step 6, image 3 of 3

    • Remove the four black 5 mm screws holding down the two silver screen hinges using a Phillips #00 screwdriver.

    Edit

  8. HP 14-fq1025nr Screen Replacement: step 7, image 1 of 2 HP 14-fq1025nr Screen Replacement: step 7, image 2 of 2

    • Unplug the screen from the motherboard by lifting the wire cover and removing the screen cord.

    • Separate the hinges from the computer.

    Edit

  9. HP 14-fq1025nr Screen Replacement: step 8, image 1 of 1

    • Remove the screen.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 3 other contributors

Yasli Kanimba Murenzi

Member since: 09/27/22

193 Reputation

2 Guides authored

Badges: 3

Team

Utah Tech University, Team 1-6, McMurrin Fall 2022 Member of Utah Tech University, Team 1-6, McMurrin Fall 2022

UTAHTECH-MCMURRIN-F22S1G6

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 4

Past 30 Days: 20

All Time: 300