HP Envy 4-1030us Bottom Cover Replacement
Introduction
Go to step 1Removing the bottom cover/door of the system is the first step in accessing the rest of the internal components of the system. After removing the screws, the cover is just held in place physically by its plastics, so be firm, but gentle, when removing it after loosening the connections.
What you need
-
-
Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.