Fix Your Stuff Community Store

How to Clean the Fan on a Toshiba TDP-XP2

Introduction

Fans on electronic devices collect a lot dust over the years, so this guide will show how to clean the fan on this Toshiba projector in order to prevent overheating. To ensure maximum performance out of a fan, some oil can be added to keep the bearings lubricated and running in tip-top shape.

What you need

  1. How to Clean the Fan on a Toshiba TDP-XP2, How to Clean the Fan on a Toshiba TDP-XP2: step 1, image 1 of 2 How to Clean the Fan on a Toshiba TDP-XP2, How to Clean the Fan on a Toshiba TDP-XP2: step 1, image 2 of 2

    • Remove the two screws from the bottom plate as shown.

    Edit

  2. How to Clean the Fan on a Toshiba TDP-XP2: step 2, image 1 of 1

    • Remove the two screws on the bulb housing.

    Edit

  4. How to Clean the Fan on a Toshiba TDP-XP2: step 3, image 1 of 1

    • Pull the tab up and pull the bulb out vertically. Some force will be required, but it will come out.

    Edit

  5. How to Clean the Fan on a Toshiba TDP-XP2: step 4, image 1 of 1

    • Using a can of compressed air, blow on the fan until all dust is gone.

    • Oil can be added in with a dropper on the bearing if needed.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Bryan Underwood

Member since: 04/02/18

697 Reputation

5 Guides authored

Badges: 3

Team

University of Memphis, Team S1-G3, Kim Spring 2018 Member of University of Memphis, Team S1-G3, Kim Spring 2018

UM-KIM-S18S1G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 4

All Time: 423