Introduction
The fader arm is made of an easily bendable metal. Because of this, small bumps or a push in the wrong direction can accidentally bend the arm. This guide will show you how to bend the arm back to its proper alignment.
What you need
-
-
Remove the fader cap from the bent fader arm
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 6-1, Kilpatrick Fall 2023 Member of University of North Texas, Team 6-1, Kilpatrick Fall 2023
UNT-KILPATRICK-F23S6G1
3 Members
4 Guides authored
