Huawei Honor 6x Back Cover Replacement

Introduction

This guide will be detailing how to separate the screen and back panel in your Huawei Honor 6x. This the first step in most replacement guides for this device.

What you need

Step 1 SIM Card

Huawei Honor 6x Back Cover Replacement, SIM Card: step 1, image 1 of 1

Turn off the device.

Edit

Step 2

Insert the SIM Card Eject Tool into the SIM card tray hole.
Press the eject tool into the hole until the tray clicks open.

Edit

Step 3

Remove the SIM tray from the device using two fingers.
When reinserting the SIM card, be sure it is properly aligned with the SIM tray.

Edit

Step 4

Remove the SIM card from the compartment using two fingers.

Edit

Step 5 Back Cover

Huawei Honor 6x Back Cover Replacement, Back Cover: step 5, image 1 of 2

Huawei Honor 6x Back Cover Replacement, Back Cover: step 5, image 2 of 2

Insert a plastic opening tool into the Micro USB charging port with the the angled side of the tool facing the screen.
Pry the screen off the back of the phone by pushing down on the opening tool.

Edit

Step 6

Huawei Honor 6x Back Cover Replacement: step 6, image 3 of 3

Slide the opening tool or spudger along the bottom of the phone and around the edge.

Edit

Step 7

Once three sides of the screen are detached, pry the phone apart using two hands.
When separating the back panel from the screen, do not pull them too far apart. There is an interconnect that is attached to both sides that could break, or tear, if pulled too far.

Edit