Fix Your Stuff Community Store

INSE S6X Filter Replacement

Introduction

If your INSE S6X is not properly picking up debris, the filter might be the culprit. This guide demonstrates how to replace the filter on your portable vacuum in under 5 minutes.

  1. INSE S6X Filter Replacement, Filter: step 1, image 1 of 3 INSE S6X Filter Replacement, Filter: step 1, image 2 of 3 INSE S6X Filter Replacement, Filter: step 1, image 3 of 3

    • Open up the dust box by pressing in the purple latch button.

    • This is what the latch should look like.

    • You should be able to see the filter cage inside the box.

    Edit

  2. INSE S6X Filter Replacement: step 2, image 1 of 2 INSE S6X Filter Replacement: step 2, image 2 of 2

    • Grab the filter cage and turn it in a counter-clockwise motion.

    • Pull out the cage and set aside the vacuum.

    Edit

  4. INSE S6X Filter Replacement: step 3, image 1 of 1

    • Firmly grab the inner part of the filter.

    Edit

  5. INSE S6X Filter Replacement: step 4, image 1 of 1

    • Pull the filter out of its slot.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 Comments

How do I get the sponge filter out

Paulette - Reply

How do I get the sponge filter out of INSEs10

Paulette - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 17

All Time: 136