Fix Your Stuff Community Store

Inse N500 Brush Roller Replacement

Introduction

If your Inse vacuum (model N500) is producing poor or limited suction quality as a result of a worn down or damaged brush roller, use this guide to replace the brush roller. The brush roller’s main function is to sweep debris into the vacuum’s line of suction. Without this, the vacuum performance is restricted to a smaller surface area.

  1. Inse N500 Brush Roller Replacement, Brush Roller: step 1, image 1 of 3 Inse N500 Brush Roller Replacement, Brush Roller: step 1, image 2 of 3 Inse N500 Brush Roller Replacement, Brush Roller: step 1, image 3 of 3

    • Press down on the release tab on the bottom of the vacuum to release the brush roller.

    Edit

  3. Inse N500 Brush Roller Replacement: step 2, image 1 of 2 Inse N500 Brush Roller Replacement: step 2, image 2 of 2

    • Remove the brush roller.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 29

All Time: 216