Introduction
Make sure your phone is turned off.
What you need
-
-
Pry open the back cover by using a fingernail or a plastic opening tool.
-
-
-
-
Remove the three Philips #00 screws from the bottom of the phone.
-
Two 5.5 mm screws
-
One 4 mm screw
-
-
-
Use your finger or opening tool to wedge the speaker out starting at the small notch at the bottom of the phone.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.