Introduction
This guide will show you how to connect and use the LeapTV's UART console
What you need
-
Step 1 Plastic things
Careful: steps 1-4 are sourced from a guide that's marked as in-progress.
-
Remove the Little plastic Thingies that the black arrows are pointing to.
-
-
-
Now, with a smaller philips screw driver, remove the 4 screws (the black arrows are pointing to).
-
-
-
-
With your hands or the help of a flathead screwdriver, remove the top of the LeapTV
-
-
-
To put it back together follow these steps. Though, i personally just didnt put the screws back in becuause of how convenint
-
