Skip to main content
Lenovo Ideapad 320-17IKB Back Panel Replacement

Lenovo Ideapad 320-17IKB Back Panel Replacement

Sam Hughes

Sam Hughes and 6 other contributors

Last updated on April 2, 2024

5 minutes
Easy

Introduction

Go to step 1

Use this guide to replace the back panel of the Lenovo IdeaPad 320-17IKB.

The back panel is the bottom plastic piece of the laptop and it often takes the most wear and tear over the years when the laptop is being used. The back panel can often crack, which can result in damages to the hardware inside the computer.

Before using this guide, check out the Lenovo IdeaPad 320-17IKB Troubleshooting page for more helpful information in diagnosing your device.

Use caution when lifting the back panel off the laptop to not damage any hardware.

  1. Lenovo Ideapad 320-17IKB Back Panel Replacement, Back Panel: step 1, image 1 of 1
    • Turn off and unplug the computer.

    • Flip the laptop over so that the back panel is facing upwards.

  2. Lenovo Ideapad 320-17IKB Back Panel Replacement: step 2, image 1 of 2 Lenovo Ideapad 320-17IKB Back Panel Replacement: step 2, image 2 of 2
    • Remove fourteen 7mm Phillips #00 screws from the back panel.

  3. Lenovo Ideapad 320-17IKB Back Panel Replacement: step 3, image 1 of 1
    • Carefully remove the optical drive by pulling the bezel away from the laptop.

  4. Lenovo Ideapad 320-17IKB Back Panel Replacement: step 4, image 1 of 2 Lenovo Ideapad 320-17IKB Back Panel Replacement: step 4, image 2 of 2
    • Use your fingers or an opening tool to gently remove the back panel from the bottom of the laptop.

    • Lay both sides of the laptop next to each other.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 27

Past 30 Days: 41

All Time: 1,338