Lenovo V15-ADA Wi-Fi Card Replacement

Step 1 Back Panel Assembly

• Remove the 10 marked screws using a Phillips #1 screwdriver bit.
• M2.5 × 7 mm, Phillips-head (6) (RED circles)
• M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Remove the 10 screws from the back plate.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• After all 10 screws have been removed, insert a spudger between the bottom plate and the housing and slide across.
• Repeat for all 4 sides until loose.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Pop off the back plate and set aside.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5 Wi-Fi Card
• Remove the Black wire with your fingers or small ESD-safe tweezers.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Remove Grey wire.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• Unscrew screw holding Wi-Fi card in place.
• 1x M2 x 3mm, Phillips #1.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 8
• Card will lift up after screw is out of place.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 9
• Pull Wi-Fi card out of slot.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 3 other contributors

Jacob Schorr

Member since: 02/21/24

433 Reputation

4 Guides authored

Badges: 4

• 
• 
• 

+1 more badge

Team

University of Kentucky, Team 1-2, Martin Spring 2024 Member of University of Kentucky, Team 1-2, Martin Spring 2024

UKY-MARTIN-S24S1G2

4 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview