Introduction
This guide will show you how to replace the belt clip on your Milwaukee 2704-20 drill. It is a very simple process and will not take much of your time. The only tool needed for this guide is a screwdriver.
What you need
-
-
Using a star screwdriver (T7), remove the single screw (6-32 x 5/16” Pan Hd. Taptite T-15 Screw) supporting the belt clip.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 2-1, Petersen Spring 2023 Member of UMass Dartmouth, Team 2-1, Petersen Spring 2023
UMASSD-PETERSEN-S23S2G1
4 Members
7 Guides authored
