Fix Your Stuff Community Store

Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement

Introduction

Use this guide to replace a damaged gearcase insulator on a Milwaukee Reciprocating Saw 6538-21-B36B (2010).

The gearcase insulator is a component that protects the gear case in power tools. It helps prevent damage to the gear case by providing a layer of insulation and cushioning if damaged use this guide if it needs to be repaired.

  1. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: step 1, image 1 of 2 Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement, Gearcase Insulator: step 1, image 2 of 2

    • Pull up on the shoe release lever until it's perpendicular to the gearcase insulator.

    Edit

  3. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: step 2, image 1 of 1

    • Pull the shoe assembly out from the saw.

    Edit

  4. Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: step 3, image 1 of 2 Milwaukee Reciprocating Saw 6538-21-B36B (2010) Gearcase Insulator Replacement: step 3, image 2 of 2

    • Remove the gearcase insulator by folding over the rubber, dislodging the insulator from the red shift lever, and pulling it off.

    • Using the screwdriver to help lift the rubber over the lever and folding it over may be helpful.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 16

All Time: 41