Introduction
For any electrical issues with the Milwaukee Rotary Hammer 260520 D14A 2016, such as a stuck trigger switch or inconsistent speeds, please refer to this guide for instructions on replacing the housing assembly for the drill.
The housing switch assembly is the part of the device that controls the device's electrical flow, and can connect and break electrical circuitry.
What you need
-
-
-
Gently remove the housing switch assembly near the drill trigger from the handle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.