/
My Workbench

Get quick access to guides, parts and answers for your devices

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
Join
Log In
Join the world's largest repair community
Netgear Arlo Charging Port Replacement

Netgear Arlo Charging Port Replacement

Brian Johnson

Brian Johnson and one other contributor

Last updated on March 17, 2021

8 minutes
Moderate

Introduction

Go to step 1

This is a step-by-step guide on how to remove the charging port in a Netgear Arlo

What you need

Parts

Tools

Show more…

iFixit earns commission when you buy through these links.

  1. Netgear Arlo Charging Port Replacement, Plastic Housing: step 1, image 1 of 1

    • Remove the 2 (3.5mm) housing screws with a J0 screwdriver.

    Edit

  2. Netgear Arlo Charging Port Replacement: step 2, image 1 of 2 Netgear Arlo Charging Port Replacement: step 2, image 2 of 2

    • Slide the unlocked battery cover forward to remove 2 (3.5mm) screws, that are behind the cover.

    Edit

  3. Netgear Arlo Charging Port Replacement: step 3, image 1 of 1

    • Open the battery cover and remove the 2 (3.5mm") screws from under the cover.

    Edit

  4. Netgear Arlo Charging Port Replacement: step 4, image 1 of 3 Netgear Arlo Charging Port Replacement: step 4, image 2 of 3 Netgear Arlo Charging Port Replacement: step 4, image 3 of 3

    • Use a plastic opening tool to start separating the plastic housing from the front side of the battery cover.

    • Next, start separating the plastic cover from the rear of the plastic housing, and work your way down the seam line.

    • Make sure the plastics snaps on the front of the plastic get unhooked from the grey plastic ring around the front of the camera.

    Edit

  5. Netgear Arlo Charging Port Replacement: step 5, image 1 of 3 Netgear Arlo Charging Port Replacement: step 5, image 2 of 3 Netgear Arlo Charging Port Replacement: step 5, image 3 of 3

    • Remove the screw (3.5mm) near the sync button holding the opposite side of the camera on.

    • Remove the second screw (3.5mm) on the back of the camera to remove the second housing.

    • Once the screws are removed use an opening tool to pry back the second plastic mount.

    Edit

  7. Netgear Arlo Charging Port Replacement, Lens Assembly: step 6, image 1 of 1

    • Remove 4 (6mm) large screws with a J00 screwdriver.

    • There are 2 on each side. This will allow you to remove the clear housing from the white housing.

    Edit

  8. Netgear Arlo Charging Port Replacement: step 7, image 1 of 2 Netgear Arlo Charging Port Replacement: step 7, image 2 of 2

    • Once screws are removed, pull apart the clear housing.

    • Remove rod from camera cover.

    Edit

  9. Netgear Arlo Charging Port Replacement: step 8, image 1 of 3 Netgear Arlo Charging Port Replacement: step 8, image 2 of 3 Netgear Arlo Charging Port Replacement: step 8, image 3 of 3

    • Remove Large ribbon cable first to disconnect front of camera from main body.

    • Remove 4 (3.5mm) small black screws from motherboard of the camera unit.

    • Remove smaller ribbon cable from underneath yellow tape.

    Edit

  10. Netgear Arlo Charging Port Replacement: step 9, image 1 of 1

    • Once all ribbon cables are removed, remove the motherboard and camera assembly by pulling up on the black camera motherboard.

    Edit

  11. Netgear Arlo Charging Port Replacement, Charging Port: step 10, image 1 of 1

    • Remove the 2 (.135") housing screws with a JIS00 screwdriver

    Edit

  12. Netgear Arlo Charging Port Replacement: step 11, image 1 of 1

    • Remove 4 (.135") screws on the inside of the battery compartment using the JIS 00 screwdriver.

    Edit

  13. Netgear Arlo Charging Port Replacement: step 12, image 1 of 1

    • Slide the two halves apart

    Edit

  14. Netgear Arlo Charging Port Replacement: step 13, image 1 of 1

    • Remove the 2 (.135") screws holding the charging port on using the JIS 00 screwdriver.

    Edit

  15. Netgear Arlo Charging Port Replacement: step 14, image 1 of 2 Netgear Arlo Charging Port Replacement: step 14, image 2 of 2

    • Remove the ribbon by prying the black ribbon holder up using the opening tool.

    • Pull the ribbon away from the charging port.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 1 other contributor

Brian Johnson

Member since: 03/21/18

187 Reputation

1 Guide authored

Badges: 5

+2 more badges

Team

IUPUI, Team S2-G1, Freund Spring 2018 Member of IUPUI, Team S2-G1, Freund Spring 2018

IUPUI-FREUND-S18S2G1

2 Members

4 Guides authored

4 Comments

Great Job, Thank you!

Bob Olive Sr - Reply

Great thanks where did you get the replacement cable please thanks Mike

mikewalters1951 - Reply

where did you get the replacement cable please thanks  BOB

robertwatkins61 - Reply

Any hints on where the new port came from? I have the baby monitor and the port is cheap rubbish and needs replacing. Thanks

David - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 14

All Time: 5,401