Nikon Coolpix L830 LCD Monitor Replacement

Introduction

If the LCD monitor on your Nikon Coolpix L830 is corrupted or completely blank, replacement is necessary. Following these steps will allow you to replace the broken screen with a new one to allow complete monitor functionality to return.

What you need

Step 1 LCD Monitor

Nikon Coolpix L830 LCD Monitor Replacement, LCD Monitor: step 1, image 1 of 1

Use a Phillips head P000 screwdriver to remove the four 3.0 mm Phillips screws on the back of the monitor.

Edit

Step 2

Use a Phillips head P000 screwdriver to remove the two 3.0 mm Phillips screws on the hinge cover.

Edit

Step 3

Remove the top hinge cover.
The top hinge cover contains screw holes.
Remove the bottom hinge cover.
The bottom hinge cover contains no screw holes.

Edit

Step 4

Remove the back cover of the LCD monitor with your hands or a plastic opening tool.
The cover will slide down the hinge, but it will not be completely removed.

Edit

Step 5

Use your thumb to gently pull the small flex ribbon wire connector from its socket.
Use your thumb to gently pull the wide flex ribbon wire connector from its socket.

Edit