Philips Sonicare 2 Series Disassembly

Jonathan Jarvis and 6 other contributors

Last updated on June 2, 2023

20 minutes - 1 hour

Easy

Prerequisite Only

This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

Introduction

Go to step 1

This is a prerequisite only guide. Make sure your toothbrush is unplugged from the charger before beginning the disassembly. Also use caution while using any metal tools. This is too avoid electric shock. This is guide is used for the disassembly for the Philips Sonicare 2 series toothbrush.

What you need

Tools

Step 1 Philips Sonicare 2 Series Disassembly

Philips Sonicare 2 Series Disassembly, Philips Sonicare 2 Series Disassembly: step 1, image 1 of 1

Pull upwards to remove the brush head from the top of the device.

Edit

Step 2

Remove the 12 mm T8 Torx screw from the bottom of the toothbrush. After removing the screw, pry off the base with a plastic opening tool.

Edit

Step 3

Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.
Be very careful not to damage the charging port during this step. Otherwise you will have to solder this part back to the device as shown in the second figure.

Edit