Fix Your Stuff Community Store

Ridgid R350RHE 2012 Magazine Replacement

Introduction

The magazine holds the various fasteners available for the Rigid R350RHE nail gun. When the magazine is damaged such as when the nail gun has been dropped and bent the magazine out of shape the easiest option is to replace the magazine. A damaged magazine can be responsible for misfires and jams and will be a severe impediment to proper usage of the nail gun.

You will need a 5/32" to remove all screws in this guide keep track of them since they have different lengths depending on their location.

What you need

  1. Ridgid R350RHE 2012 Magazine Replacement, Magazine: step 1, image 1 of 2 Ridgid R350RHE 2012 Magazine Replacement, Magazine: step 1, image 2 of 2

    • Remove the single 25 mm hex screw that secures the workpiece contact cover with a 5/32" Allen wrench.

    • Remove the single 14 mm hex screw that secures the magazine to the lower handle with a 5/32" Allen wrench

    Edit

  3. Ridgid R350RHE 2012 Magazine Replacement: step 2, image 1 of 1

    • Remove the work piece contact cover by pulling it perpendicular to the nail gun.

    Edit

  4. Ridgid R350RHE 2012 Magazine Replacement: step 3, image 1 of 2 Ridgid R350RHE 2012 Magazine Replacement: step 3, image 2 of 2

    • Remove the magazine by pulling it perpendicular to the device.

    • Pulling it perpendicular will ensure no other parts fall out that are unaccounted for.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 22

All Time: 114