Introduction
Before you start
Even though this process doesn't deal with any electrical connections, it is a good habit to unplug your Ryobi D620H drill before doing any work on it.
Removing the right side of the case is a prerequisite for all internal repairs.
What you need
-
-
All nine 16mm long Torx20 screws (Circled in red).
-
Turn the screwdriver counterclockwise to loosen the screws.
-
Remove all nine screws completely.
-
-
Replace the right-side case, simply reinsert all of the T20 screws and fasten them down completely.
Replace the right-side case, simply reinsert all of the T20 screws and fasten them down completely.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
UMass Dartmouth, Team 1-2, Petersen Fall 2023 Member of UMass Dartmouth, Team 1-2, Petersen Fall 2023
UMASSD-PETERSEN-F23S1G2
4 Members
6 Guides authored
