Step 1 Unplug

• Before you begin, remember to disconnect the mains plug.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2



• Remove the dust extraction nozzle, blade and edge guide.
• Refer to the instructions for the device to remove them.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Unscrew the screw to access the brushes.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Take the carbons out of their housing.
Translate
One comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Replace the new carbon brushes in their housing.
• When putting the new carbon back, check that the legs of the carbons are well located in the rectangles.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Replace the blade, edge guide, and extraction bit on the saw.
Translate
One comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-135362" src="https://www.ifixit.com/Guide/embed/135362/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-135362"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/135362" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview