Fix Your Stuff Community Store

Sony Cyber-shot DSC-H300 Rear Case Replacement

Introduction

This guide shows a step by step process on how to replace the rear case of the camera. You must be careful during this guide due to certain parts being very vulnerable to breaking. If the case isn't staying in position or the buttons are unresponsive take a look at our troubleshooting guide for more help.

What you need

  1. Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: step 1, image 1 of 2 Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: step 1, image 2 of 2

    • Remove the four 6mm Phillips #00 screws.

    Edit

  3. Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: step 2, image 1 of 2 Sony Cyber-shot DSC-H300 Rear Case Replacement, Removing screws: step 2, image 2 of 2

    • Remove the two 6mm Phillips #00 screws.

    • Remove the two 3mm Phillips #00 screws.

    Edit

  4. Sony Cyber-shot DSC-H300 Rear Case Replacement: step 3, image 1 of 3 Sony Cyber-shot DSC-H300 Rear Case Replacement: step 3, image 2 of 3 Sony Cyber-shot DSC-H300 Rear Case Replacement: step 3, image 3 of 3

    • Use the flat end of a plastic spudger to pry apart the rear cover from the body of the camera.

    • Be careful not to damage the three plastic clips securing the top edge of the rear cover.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Author

with 5 other contributors

Christian Morales

Member since: 02/14/18

205 Reputation

1 Guide authored

Badges: 7

+4 more badges

Team

USF Tampa, Team S1-G6, Nance Spring 2018 Member of USF Tampa, Team S1-G6, Nance Spring 2018

USFT-NANCE-S18S1G6

3 Members

10 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 3

Past 30 Days: 29

All Time: 1,192