Fix Your Stuff Community Store

SteelSeries Apex 3 TKL Rubber Membrane Replacement

Introduction

Here is a guide on how to replace or realign a rubber membrane in a SteelSeries Apex 3 TKL. This guide will be helpful if some of your keys are not working and they are starting to stick. Making sure the rubber membrane is perfectly aligned to the back of the keys could be a solution to your problem.

What you need

  1. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Back Panel: step 1, image 1 of 1

    • Use a JIS #00 screwdriver to remove all back panel screws.

    Edit

  3. SteelSeries Apex 3 TKL Rubber Membrane Replacement: step 2, image 1 of 2 SteelSeries Apex 3 TKL Rubber Membrane Replacement: step 2, image 2 of 2

    • Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

    Edit

  4. SteelSeries Apex 3 TKL Rubber Membrane Replacement, Rubber Membrane: step 3, image 1 of 1

    • Lift off the rubber membrane.

    • When replacing, make sure the back stubs align with the back of each key on the keyboard.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Tyler Pepe

Member since: 03/20/24

169 Reputation

2 Guides authored

Badges: 2

Team

UMass Dartmouth, Team 1-3, Santin Spring 2024 Member of UMass Dartmouth, Team 1-3, Santin Spring 2024

UMASSD-SANTIN-S24S1G3

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 8

All Time: 17