Fix Your Stuff Community Store

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

Introduction

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: step 1, image 1 of 2 Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: step 1, image 2 of 2

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

    Edit

  3. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: step 2, image 1 of 1

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Author

with 3 other contributors

Dawoud Daoud

Member since: 02/14/24

199 Reputation

2 Guides authored

Badges: 3

Team

University of Memphis, Team 3-5, Sneed Spring 2024 Member of University of Memphis, Team 3-5, Sneed Spring 2024

UM-SNEED-S24S3G5

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 6

Past 30 Days: 14

All Time: 85