Step 1 Toniebox Opening Procedure



• Put the Toniebox on a flat surface (e.g. a desk or a workbench).
• Apply some pressure and turn the Toniebox counterclockwise to unlock the two clips beneath the bottom plate.
• You will hear a "klick" when the two clips unlock.
Translate
4 comments
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Remove the bottom plate.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove the Phillips #1 screw on the bottom of the Toniebox.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Lift the inner part out of the foam housing.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5 Removing the Battery Compartment
• Pull the inner-plastic part out of the body
• Loosen the two screws on the battery compartment and then carefully remove the battery compartment.
Translate
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-141675" src="https://www.ifixit.com/Guide/embed/141675/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-141675"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/141675" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview