Fix Your Stuff Community Store

Turtle Beach Recon 70P Ear Pads Replacement

Introduction

Earpads tend to tear after extensive use, disrupting the comfortable experience of using your headset. This guide will take you through the steps to replacing the ear pads on your gaming headset.

What you need

  1. Turtle Beach Recon 70P Ear Pads Replacement, Ear Pads: step 1, image 1 of 2 Turtle Beach Recon 70P Ear Pads Replacement, Ear Pads: step 1, image 2 of 2

    • Gently pull the edge of the ear pads until the leather comes loose from the slot.

    • Be careful to not tear the fabric if you intend to reuse the ear pads.

    Edit

  3. Turtle Beach Recon 70P Ear Pads Replacement: step 2, image 1 of 3 Turtle Beach Recon 70P Ear Pads Replacement: step 2, image 2 of 3 Turtle Beach Recon 70P Ear Pads Replacement: step 2, image 3 of 3

    • Ensure the ear pad is orientated correctly.

    • To install new ear pads, insert part of the edge of the ear pad into the slot, then gently stretching it over the speaker.

    Edit

  4. Turtle Beach Recon 70P Ear Pads Replacement: step 3, image 1 of 2 Turtle Beach Recon 70P Ear Pads Replacement: step 3, image 2 of 2

    • Using your finger nail or an opening pick, push the remaining leather into the slot.

    Edit
Conclusion

Your ear pads should be replaced if all these steps were followed correctly.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 27

All Time: 99