Introduction
Use this guide to replace the back panel on your Nintendo Wii U GamePad.
What you need
-
-
Face the GamePad down and unscrew the two 4.7 mm Phillips #00 screws which are attached to the battery cover.
-
Lift up and remove the battery cover.
-
-
-
-
Remove the ten 8.9mm Tri-wing Y1 screws hidden underneath square stickers.
-
Lift up the back plate.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
12 other people completed this guide.
2 Comments
and the front?