Intro History: MacBook Pro 13" Unibody Mid 2012 Heat Sink Replacement
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
| Device |
|
|
| Type |
|
|
| Thing |
|
|
| Title |
|
|
| Introduction |
|
|
| Time Required Min |
45 minutes
|
|
| Time Required Max |
1 hour
|
|
| Imageid |
Before
After
|
|
| Difficulty |
Difficult
|
|
| Conclusion |
|
|
| Author | ||
| Public |
No
|
Guide Prerequisites
- #1 was empty but is now MacBook Pro 13" Unibody Early 2011 Lower Case Replacement.
- #2 was empty but is now MacBook Pro 13" Unibody Early 2011 Battery Connection Replacement.
- #3 was empty but is now MacBook Pro 13" Unibody Early 2011 Fan Replacement.
- #4 was empty but is now MacBook Pro 13" Unibody Early 2011 Logic Board Replacement.
Tools
- Arctic Silver Thermal Paste x1 added.
- Phillips #00 Screwdriver x1 added.
- Phillips #1 Screwdriver x1 added.
- Spudger x1 added.
- T6 Torx Screwdriver x1 added.
Flags
- In Progress added.
Steps
Step #: 1
Before
After
