Fix Your Stuff Community Store

Intro History: HP Windows Mixed Reality Controllers TPC-Q044 Main Circuit Board Replacement

Edit by Eeshan Mishra —

Edit approved by Eeshan Mishra

Before
After
Unchanged
Device
HP Windows Mixed Reality Controllers TPC-Q044
Type
replacement
Thing
Circuit Board
Title
HP Windows Mixed Reality Controllers TPC-Q044 Circuit Board Replacement
Introduction
This guide goes over how to replace the controller's main circuit board.
If your TPC-Q044 circuit board starts failing when using your controller, you may want to think about replacing the component. The failure may be a result of bad soldering or missed connections. The replacement of the circuit board is not too complex. You will need the indicated screwdrivers and a spudger to complete this task. There are no warnings or potential hazards when replacing the pad.
Time Required Min
No estimate
Time Required Max
No estimate
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Eeshan Mishra
Public
No

Guide Prerequisites

Tools

  • Spudger x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Phillips #0 Screwdriver x1 added.

Flags

  • In Progress added.
  • Student In Progress added.

Steps

Step #: 1
Before
After
stepid 230345 stepid 230345