Intro History: Samsung Galaxy S9 Rear Camera Bezel With Fingerprint Sensor Replacement

Device	Samsung Galaxy S9
Type	replacement
Thing	Fingerprint Sensor and Camera Lens Cover
Title	Samsung Galaxy S9 Fingerprint Sensor and Camera Lens Cover Replacement
Introduction	Use this guide to remove the fingerprint sensor and the camera lens cover in the Samsung Galaxy S9. Opening the Samsung Galaxy S9 will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''', but will '''loose its water-protection'''. You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Time Required Min	20 minutes
Time Required Max	35 minutes
Imageid	Before After
Difficulty	Moderate
Conclusion	'''Secure the new back cover''' with pre-cut adhesive or double-sided adhesive tape. To reassemble your device, follow these instructions in reverse order. After installing the rear cover, apply strong, steady pressure to your phone for several minutes to '''help the adhesive form a good bond''', such as by placing it under a stack of heavy books.
Author	Dominik Schnabelrauch
Public	No

Guide Prerequisites

• #1 was empty but is now Samsung Galaxy S9 Rear Glass Removal.

Tools

Parts

Flags

Steps