Fix Your Stuff Community Store

Intro History: iPad mini 5 Wi-Fi Magnetic Sensor Replacement

Edit by Kyle Smith —

Edit approved by Kyle Smith

Before
After
Unchanged
Device
iPad mini 5 Wi-Fi
Type
replacement
Thing
Magnetic Sensor
Title
iPad mini 5 Wi-Fi Magnetic Sensor Replacement
Introduction
Follow this guide to remove or replace the magnetic sensor on an iPad mini 5 Wi-Fi.
'''For your safety, discharge the battery below 25% before disassembling your device.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair. If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]].
Time Required Min
1 hour
Time Required Max
2 hours
Imageid
Before
After
Difficulty
Very difficult
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow these instructions in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting]], or ask our [link|https://www.ifixit.com/Answers/Device/iPad%20Mini%205|iPad mini 5 Answers community] for help.
Author
Kyle Smith
Public
No

Guide Prerequisites

Tools

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Suction Handle x1 added.
  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Soldering Station Hakko FX888DX-010BY x1 added.
  • Solder ROHS Lead Free Rosin Core x1 added.
  • Safety Glasses x1 added.

Parts

  • iPad mini 4/5 Magnetic Sensor Cable x1 added.
  • Tesa 61395 Tape x1 added.

Flags

  • In Progress added.

Steps

Step #: 1
Before
After
stepid 290763 stepid 290763
Step #: 2
Before
After
stepid 290764 stepid 290764