Intro History: Nintendo Switch Bluetooth Antenna Replacement
Edit by Jerry Wheeler —
Edit approved by Jerry Wheeler
- Before
- After
- Unchanged
| Device |
|
|
| Type |
|
|
| Thing |
|
|
| Title |
|
|
| Time Required Min |
2 hours
|
|
| Time Required Max |
2 hours
|
|
| Imageid |
Before
After
|
|
| Difficulty |
Difficult
|
|
| Conclusion |
|
|
| Author | ||
| Public |
No
|
Guide Prerequisites
- #1 was empty but is now Nintendo Switch Rear Panel Replacement.
- #2 was empty but is now Nintendo Switch Micro SD Card Reader Replacement.
- #3 was empty but is now Nintendo Switch Shield Plate Replacement.
- #4 was empty but is now Nintendo Switch Battery Disconnect Prerequisite.
- #5 was empty but is now Nintendo Switch Heat Sink Replacement.
- #6 was empty but is now Nintendo Switch Headphone Jack and Game Card Reader Replacement.
- #7 was empty but is now Nintendo Switch Fan Replacement.
- #8 was empty but is now Nintendo Switch Motherboard Replacement.
- #9 was empty but is now Nintendo Switch Right Joy Con Sensor Rail Replacement.
- #10 was empty but is now Nintendo Switch Left Joy Con Sensor Rail Replacement.
- #11 was empty but is now Nintendo Switch Power and Volume Button Board Replacement.
- #12 was empty but is now Nintendo Switch Exterior Power and Volume Button Replacement.
- #13 was empty but is now Nintendo Switch WiFi Antenna Replacement.
- #14 was empty but is now Nintendo Switch Screen Replacement.
- #15 was empty but is now Nintendo Switch Front Frame Replacement.
Tools
- Tri-point Y00 Screwdriver x1 added.
- JIS #000 Screwdriver x1 added.
- Tweezers x1 added.
- Spudger x1 added.
- Microfiber Cleaning Cloths x1 added.
- Isopropyl Alcohol x1 added.
- K5-PRO Viscous Thermal Paste x1 added.
- Thermal Paste x1 added.
- iFixit Opening Tool x1 added.
- ESD Safe Blunt Nose Tweezers x1 added.
- iOpener x1 added.
- iFixit Opening Picks (Set of 6) x1 added.
- Suction Handle x1 added.
- Tesa 61395 Tape x1 added.
Parts
- Nintendo Switch Rear Panel x4 added.
- Nintendo Switch Micro SD Card Reader x4 added.
- Nintendo Switch Shield Plate x4 added.
- Nintendo Switch Heat Sink x4 added.
- Nintendo Switch (2017 HAC-001) Game Card Reader x4 added.
- Nintendo Switch Fan x4 added.
- Nintendo Switch (2017 HAC-001) Motherboard x4 added.
- Nintendo Switch Right Joy-Con Sensor Rail x2 added.
- Nintendo Switch Left Joy-Con Sensor Rail x2 added.
- Nintendo Switch Power Button Board x4 added.
- Nintendo Switch Screen Assembly x2 added.
- Nintendo Switch Screen x2 added.
Flags
- In Progress added.
- Community-Contributed Guide added.
Steps
Step #: 1
Before
After