|
Introduction |
Use this guide to revive your iPhone 8 Plus with a new battery. If your battery is swollen, [https://www.ifixit.com/Wiki/[What_ to_ do_ with_ a_ swollen_ battery|take appropriate precautions|new_window=true]]. | | | This guide instructs you to fully detach the display assembly; this is intended to prevent accidental damage to the display cables. If you feel comfortable removing the battery without putting undue strain on the display cables, you can skip the steps for detaching the display. Additionally, while it’s possible to remove the adhesive strips securing the battery as soon as you open the phone, this guide recommends first removing the Taptic Engine. Doing so reduces the risk of breaking the lower adhesive strips accidentally, either by snagging them on the Taptic Engine, or by pulling the strips at too sharp of an angle. | | For optimal performance after completing thisthe guide, calibrate your newly installed battery: DrainCharge it below 10to 100%, thenand keep charging it for at least two more hours. Then, use it until it shuts off due to low battery. Finally, charge it uninterrupted to 100%. | | | [video|https://www.youtube.com/watch?v=OZMKua4LgHk] |
|