Changes to Step #6
Edit by Adam O'Camb —
Edit approved by Adam O'Camb
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, rock the screen up and down to weaken the adhesive until you can fit an opening pick inside. |