Fix Your Stuff Community Store

Changes to Step #6

Edit by Arthur Shi —

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case.
+[* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame.
[* black] Insert an opening pick into the gap.
- [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.
+[* icon_note] The watertight adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool.