Changes to Step #2
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [* black] Push the blue handle away from the hinge to engage opening mode. | |
| [* black] Turn the handle clockwise until you see the cups start to stretch. | |
| [* icon_note] Make sure the suction cups [link|https://guide-images.cdn.ifixit.com/igi/bEmDKjgQ2wnEDpSe.full|remain aligned to each other|new_window=true]. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms. | |
| [* black] Wait one minute to give the adhesive a chance to release and for the bottom of the screen to open. | |
| + | [* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap. |
| [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle clockwise half a turn. | |
| [* icon_caution] Don't crank more than a half a turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. | |
| [* black] ***Skip the next two steps.*** |