Changes to Step #3
Edit by Alex Diaz-Kokaisl —
Edit approved by Alex Diaz-Kokaisl
- Before
- After
- Unchanged
Step Lines
| [* black] [guide|25705|Heat an iOpener|new_window=true] and thread it through the arms of the Anti-Clamp. | |
| [* black] Fold the iOpener so it lays on the bottom edge of the iPhone. | |
| [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. | |
| [* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap. | |
| [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn. | |
| [* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. | |
| - | [* black] ***Skip the next |
| + | [* black] ***Skip the next two steps.*** |